aerotech
spacer
spacer leader
spacer
News
spacer
spacer
AeroTech News Archive
spacer
2017
spacer
Click here for 2016 archives
Click here for 2015 archives
Click here for 2014 archives
Click here for 2013 archives
Click here for 2012 archives
Click here for 2011 archives
Click here for 2010 archives
Click here for 2009 archives
Click here for 2008 archives
Click here for 2007 archives
Click here for 2006 archives
Click here for 2005 archives
Click here for 2004 archives
Click here for 2003 archives
  news
spacer
spacer
11/13/2017
AeroTech Releases Arreauxbee-Hi™ Model Rocket Kit
AeroTech Consumer Aerospace is pleased to announce the release of the Arreauxbee- Hi™ model rocket kit. The Arreauxbee-Hi kit pays homage to the beginnings of the model rocketry hobby by recalling the first mass-produced model rocket kit, the Aerobee-Hi. Manufactured in 1958 by Model Missiles, Inc., the Aerobee-Hi model brought the hobby industry into the space age. Don’t let this trip down memory lane fool you. There is nothing old-fashioned about the AeroTech Arreauxbee-Hi. At 4-1/2 feet tall and more than two-and-a-half inches in diameter, the Arreauxbee-Hi incorporates all the advanced design and engineering features that AeroTech kits are known for: • Aluminum motor retainer • Precision airfoil molded fins • Launch rail guides AND launch lugs included • FIN-LOK™ fin mounting system • LABYRINTH™ wadding-less ejection gas cooling system • Pre-assembled nylon fabric parachute • Flies on AeroTech standard single-use, Econojet™, Economax™ & RMS™ motors The Arreauxbee-Hi (P/N 89022) carries a suggested retail price of $99.99 and is now available for purchase from the AeroTech Store and through our network of AeroTech dealers. SPECIFICATIONS: LENGTH: 54”/137cm DIAMETER: 2.6”/6.7cm NOSE CONE: 5:1 ogive WEIGHT: 16.5 oz./470 gms FINS: 3 STAGES: 1 MOTOR MOUNT: 29mm RECOVERY SYSTEM: Rip-stop nylon parachute MOTOR RETENTION: Machined aluminum retainer
top
spacerNews Photospacer
frame
 
 
spacer
11/13/2017
NAR S&T Certifies 98mm AT Crossloads™ for Use with CTI™ Hardware
AeroTech Consumer Aerospace is pleased to announce the certification of AeroTech 98mm reloads with the use of Cesaroni Technology Incorporated™ 98mm hardware. 98mm AeroTech reloads that use the smaller nozzles may be used immediately with CTI™ hardware. Motors that use a large 98mm nozzle or a 98mm Medusa nozzle are not yet compatible. A full list of compatible 98mm AT Crossloads™ is listed below. Reloads with the AT Crossloads™ label on the packaging will include an additional set of o-rings to be used with CTI™ hardware. Customers who have 98mm reloads manufactured before this announcement can purchase the necessary o-rings at www.rocketmotorparts.com or check with any AeroTech dealer for availability. Instructions will be available online as both a PDF file and as an instructional video on the AeroTech Youtube channel.
top
spacerNews Photospacer
frame
 
 
New to High Performance Rocketry?
Visit the Rocket Central website (www.rocketcentral.org) for information about how to build and launch rockets thousands of feet in the air. This site includes information about high performance composite rocket motors, reloadable motor systems, and contact information for local rocket clubs in your area. Also visit the NAR & Tripoli websites.
 
 
spacer
Click here to link to the National Association of Rocketry's (NAR) Launch Calendar
spacer
spacer
We encourage our customers to purchase full-line AeroTech products direct from the authorized dealers listed here.
spacer
spacer
spacer
or go to Dealers Page
spacer
spacer